A look into production

With social media at all of our fingertips, it's hard to stay up to date on our blog. However, since we'd like to keep this page as relevant as possible, we thought it would be cool to share with you some of the stages of our production. Here is a rough rundown on some of the time-intense love & labor involved going into each wallet we produce. Enjoy!

1. Before we do anything, we apply a treatment to the backside of each hide of leather. This special teatment seals and stiffens the leather. After that, we punch out each rectangle of leather & thumb slot, one at a time, from a hide of imported Italian leather. Once that is complete, we move on to the embossing, where each logo is pressed into the leather by hand. The result is this:

2. Next we apply the utility nylon liner. Using a special adhesive, one side of the liner is glued to the inside of the wallet. After it has cured, each wallet is flipped and the the other side of the liner is adhered in place.

3. After the liner adhesive is full cured, we take the wallets over to punch the center-panel notch. This is done on a spring-loaded jig we fabricated ourselves. Once each of the notches is punched out of the wallet, we apply a special edge coat to the unfinished and freshly cut edges.

4. Next we move on to temporarily gluing in the custom made elastic. Our elastic comes on giant rolls, so first each piece needs to be cut to size off the roll. This process is done with a hot knife. After we cut each piece, it is then glued to the back side of each wallet, wrapping the edges around to the center. Another jig we fabricated is used to align each piece, and remember, each wallet is done one at a time. Once that glue cures, we fold and glue the wallet closed - to what will be it's final shape.

5. After that, it's on to stitching!

6. Once the wallets are stitched, we go through our quality control process where test each one and go over all the details. If the wallet meets our high standards, we apply the final the step - Hand-waxing! The leather conditioner we use contains a natural beeswax, so waxing each wallet not only beautifies, strengthens, and conditions the leather, it also helps waterproof it and ensures your wallet a durable long life.

I hope this brief rundown of the basic steps involved in making each one of our wallets helps you appreciate the time and care put into each one, as well as give you an understanding of how the production process on our end works. We're proud to say that each wallet we make is 100% handcrafted in the good ol' USA.

Orders ship SAME or NEXT DAY!

We've become good friends with the local Post Office! Why, you may ask? Because we're in there everyday! That's right... In case you didn't know, we ship orders daily! We really appreciate your business and support, that's why we do everything in our power to make sure you're happy and taken care of.

ALL orders placed before 1PM (EST) ship out the SAME DAY you place it!
If you order after 1PM, no worries, your wallet ships the NEXT DAY!

We hope you're happy with quick turnaround. And don't forget, all US orders come with FREE SHIPPING & TRACKING! For shipping outside of the country, it's only an additional $5 (and still ships either same or next day).

Thanks again to everyone who has placed orders with us, we really appreciate your support!

Fully Stocked & NEW Colors available!

We forgot to announce that we've been fully stocked now for a little over a week, so we thought we'd take this time to also announce that we now are offering the SLIMplistic Wallet in 3 NEW colors! We've got Red, Blue, and Gray, and each color has the option of a black or no-color logo embossment. These new colors come from the same tannery in Italy, and are vegetable tanned leathers, just like the original Brown & Black SLIMplistic. I hope you're stoked, because we sure are!


You can order these new colors and check out the full-line HERE!

Brown Wallets are Fully Stocked

I should have posted this on Monday... We are fully re-stocked in all styles of our brown wallets! We've got a little over 150 on hand, so we will see how long they last. We expected to pick up about 150 black wallets as well, however there were only a handful complete. The rest still required stitching, so we will have them in hand next week for sure. Thanks again for your support, and if you're waiting to receive your black SLIMplistic, hold tight, it's almost on it's way!

Back-Order Notifications
It's been hard keeping our supply up with the demand for our wallets, so as you can imagine we tend to sell out pretty quickly. We just wanted to let you know that if there is a certain style wallet you'd like, but we happen to be out-of-stock at the moment, please just email us, and we can put you on a list to be notified as soon as they come back in stock. We can also give you an estimate as to when we should be receiving them. Sometimes we might be picking them up that afternoon, but the site still says we're sold out... So, feel free to hit us up! We'd love to help and answer any questions you might have about out-of-stock items! Thanks.
Our ads in Focus Skate Mag!

For the last few months we've been running some ads in Focus Skate Mag, and it has been going really well. For anyone who doesn't know, Focus is a freely distributed skateboarding magazine that saturates the East Coast. I just realized we haven't shared any of our ads on our blog, so I'll break you off with the last 4! If you'd like to check out a digital version of the magazine, HERE IS A LINK to the latest issue! Let us know what you think of our ads!




We Make Our Own Custom Tooling

We take a lot of pride in our product, and have dedicated much time to the development of our wallets. What you might not know, is we engineered and fabricated our own custom tooling to aid in the manufacturing process OURSELVES! That's right, we're not afraid to get our hands dirty and go the extra mile to make sure you receive the best possible product.

Here is a little behind the scenes peek at one of the jigs we personally made to improve the production of our wallets. What you'll see here is the punch that cuts the notch in the center panel of the wallet. In case you were wondering why this is important - the notch serves two purposes.

1 - It allows you to push your cards past flush at the top of the wallet, so all your cards are tucked into the wallet and secure.

2- It allows you to easily access the cards located in the center of the wallet.

Enjoy the photos!

Notch Cutting Jig Assembled

Underside of custom tooling

Production is on point!

We checked in with production last week, the day after X-mas,  and they had an INSANE amount of wallets - countless hundreds upon hundreds - just about ready to go! They just needed some finishing touches and then they'll be ready to go!

Here are just a few photos from the visit.

I hope everyone had a great holiday and cheers to a happy and prosperous New Year!
Thank You Kickstarters!

Welcome to our website and first-ever blog post. And none of this would have been possible without you!

You see, a little over a month ago we launched our campaign on Kickstarter to raise money to start this business - our first product being the SLIMplistic Wallet. Through the support of our backers, supporters, family & friends, our campaign was a successful one, and we were successfully funded as of midnight, last night (12/2/13)!

Any good leader knows that he or she is only as good as the team that supports them, and luckily for us, we've got the best team in the world, YOU! Without you, none of this would be possible, and we wouldn't be here right now, fortunate enough to write this blog entry.

That's why this first post is dedicated to you, all of our backers and supporters throughout this entire process - THANK YOU for making our dreams become a reality! We raise our glasses in your honor, cheers!